What is the backpack buckle? What are the types? - Pesin Outdoor Products Compan

Q: What is the backpack buckle? What are the types? A: The backpack buckle is also called the ladder buckle, the three-button buckle, and the four-button buckle. It is also an indispensable part of the backpack. Generally used on backpacks to tighten webbing. For example, the lower end of the strap generally uses a four-stop buckle. Since the Buckle has a self-locking function, the height of the strap can be adjusted appropriately. The principle of the buckle is the same, the raw material is basically Nylon or Acetal, but the shape or self-locking system is a little different. This article introduces several commonly used and representative retaining buckles. 1, magic eye buckle ( Evil eye Tensionlock) This kind of Buckle has two holes at the head end, which is the origin of its name. This kind of Buckle has extremely strong pulling force, high elastic angle and enlarged gap, which is convenient for thicker webbing to use. The two small holes in the lower part can pass through the 1/8 inch rope, and can be used with a rope sleeve when wearing gloves. This kind of buckle is widely used in the connection between the strap and the fly. The side straps of some bags are also useful for this kind of buckle. 2, duckbill Buckle ( Duckbill Tensionlock) The origin of the duckbill buckle name is also related to the shape. The finger part of the head of the buckle looks like a duckbill. This design is convenient to relax the webbing with the thumb. 3, standard Buckle ( Standard Tensionlock) Listen to the name and you will know that this is the most basic and standard buckle. The head end of the standard buckle is generally flat, which is the biggest difference from the shape of the duckbill buckle. 4, mohabi Buckle ( Mojave Tensionlock)Mohabi should be a self-locking technology. The buckle is also available in mohabi. This kind of Buckle has a strong self-locking ability. The picture on the left is a standard mohabi buckle. Its shape is similar to the standard buckle, the mohabi Buckle has a certain curvature, and each gear is relatively thick. The high-elastic design makes the webbing release angle better than other similar products. In order to facilitate the use of gloves, the mohabi buckle also has a product with a hole in the head. In addition, there are replaceable buckles in the mohabie buckle. This kind of buckle can be easily buckled onto the webbing for easy installation, repair and replacement.