The manufacturing method of the splicing process of the edge of the luggage- Pesin Outdoor Products Company

The process of inserting edges is an important step in the process of making bags. This process is mainly to bond and splice the edges of parts and components according to requirements. There are many ways to insert bags. The common methods are flat inlay, stubble press inlay, Press seam inlay, butt joint, etc. First, the flat Inlay method in the flat inlay inlay process is generally used on a flat surface, usually using a highly viscous neoprene adhesive to glue the inlay, so that the inlay of the box is firmly adhered. Second, the method of pressing stubble and inserting stubble is to adopt the method of overlapping the edges between parts and pressing stubble, this process is generally used at the link of the parts and components of the suitcase or leather bag. Third, docking, docking this process is relatively simple, and the interface is relatively flat, it is to put the two sides of the components together on a plane, but the two parts are not overlapping. Four, pressure seam inlay pressure seam inlay process is a commonly used method in the design of type I Ang bag, which is to use the edge of the parts to butt on the same plane, then use seams to cover parts or decorations, when the seams are hidden and the head is firm. There are many crafts for the production of bags, and the workmanship requirements are fine, and the production personnel have a high degree of familiarity with the operation requirements. So here, Xiao Bian recommends you a manufacturer with exquisite skills-- Pesin Outdoor Products Company custom manufacturers, free to set up more than ten years, has a wealth of business experience. Perfect layout room facilities, and professional research and development and design team.