Technical terms for luggage and inspection technology terms for processing methods

1. Poor defects: carefully check various defects and defects on the surface of raw materials and auxiliary materials. Defects and defects that seriously affect cutting and product quality should be eliminated before production. 2. Check stains: check the contamination of raw materials and auxiliary materials, and carry out corresponding treatment according to the stain treatment method. 3. Color difference test: check the color difference of the original and auxiliary fabrics, and classify the diseases according to the color difference. 4. Width division: classify the original and auxiliary fabrics according to the width of the door width to facilitate the production and processing of subsequent processes. 5. Poor lining material color, feel: check the color and feel of the lining material, and classify and archive according to the inspection results. 6. Poor weft angle: check the weft angle of textile fabric and control the cutting operation in time. 7. Fumi: review whether the yield of each piece of raw materials and auxiliary materials meets the technological requirements, and report the results in time. 8. Analysis and inspection of physical and chemical indexes: carry out detailed analysis and inspection of relevant physical and chemical indexes of raw materials and auxiliary materials according to the production requirements of products, including expansion rate, tensile strength, tear strength, heat resistance and color fastness, with dry and wet rubbing fastness and other tests, the inspection results shall be promptly issued with inspection reports. Recommended Related reading: cutting technology terms for luggage terminology and processing methods sewing terms for luggage terminology and processing methods