Luggage inspection process and inspection precautions- Pesin Outdoor Products Company

The enterprise customizes personalized luggage, and after shipment, it is found that the luggage has insufficient fabric density, pulling cards and making mistakes in weaving marks, so many enterprises will inspect the luggage before shipment, many of them are not professional either. Pesin Outdoor Products Company can explain the luggage inspection process and matters needing attention according to more than ten years of customized production experience. Luggage inspection process: Package size----> Raw materials----> Accessories selection----> Logo trademark 1. Confirm whether the size of the finished package is correct. The size of the luggage is the most direct mistake, so after we get the luggage, we must first look at whether the appearance size meets our requirements, especially the instrument tool luggage tailored for the instrument. 2. Check whether the raw materials meet the company's requirements. Check the raw materials from fabric, lining and fabric. Fabric to see if it meets your requirements, under the requirements to achieve the fabric purity, fabric color and fabric functionality (Waterproof, anti-wear); In addition to the required density, the lining should be based on whether the yarn fineness, color and color fastness meet the standard, and the backing PVC should not be white and soft; The mesh should be from the mesh shape, gram weight per meter, and color. 3. Check the accessories of the luggage. Luggage accessories usually have zippers and pull tabs. The zipper should be based on the requirements of the order. The size, specification, color and color fastness of the main pull, the attached bag pull and the inner pull are correct. The pull teeth should not be noisy and should be smooth, do not get stuck or too tight, the density and width of the zipper cloth edge must meet the specific order requirements; The size and specification of the slider, whether there is a keyhole or not, the nose of the slider cannot be broken, and whether the logo, color and size of the pull tab are correct. If these fittings are made of metal, it is also necessary to check whether their color, size, wire diameter, acid prevention treatment, rust prevention treatment of special steel nails and other functions are satisfied. 4. Check the logo trademark of the luggage. Personalized custom bags, natural inspection bags logo is the top priority. We need to check whether the names, letters, sizes and colors of logo, woven logo, slider logo and other logo positions are correct to ensure the correct promotion of the company's image.