Hardware inspection standards to be kept in mind in luggage sample inspection

Luggage samples are the first step of trust construction for manufacturers and customers. In many cases, the quality of factory samples will make customers decide the manufacturing ability and sincerity of cooperation of this manufacturer. Some customers have done a good job in the inspection of luggage samples. They will have their own professional QC inspection, so they are very sensitive to the details of luggage, however, not many customers can identify the quality of luggage, especially when doing inspection points for luggage hardware accessories. Good hardware accessories, we usually judge its quality at the first sight after looking at its appearance. In fact, hardware accessories should not only look good and shine brightly, but also be used for a long time to be an excellent hardware accessory, indirectly improving the value of this luggage. How to check the bag hardware? Come on, let Pesin Outdoor Products Company keep in mind the hardware inspection standards when checking your bags. First of all, we need to understand where the hardware is broken? Common Hardware problems include poor electroplating, mold opening color difference, color fading, hand scraping, inflexible opening and closing, uncomfortable use, oxidation rust and other problems. After understanding these common problems, we will start to check whether there are these conditions in the luggage hardware. 1. Pull D buckle or circle class: Measure the inner diameter of the D buckle or circle, then measure the thickness of the iron wire, check the tightness of the iron wire interface, and whether the hand is scratched. Then carry out the tensile test, not less than 15LBS, hand-held D Buckle and circle plating is OK, the tensile force shall not be less than 28-60 KG, others are the same as above. 2. The torque of the pull tab is normally 3 # and rotates 2. 5KG is OK, the 5 # pull tab rotates 4KG left and right, the 8 # pull tab rotates 6KG left and right, and the 10 # pull tab rotates 8KG left and right. 3. Hardware logo check first from the appearance, to see whether the gloss is bright, logo printing is clear, no cracks, no fading; After looking at the quality, the customer can pull the logo to see if the fit between the logo and the bag is qualified. 4. The hardware fittings of the lock type, the surface plating is uniform and bright. Whether the edges and corners are scratched, whether the insertion is flexible, and whether the screws are matched. After the lock is inserted, it must bear a pulling force of not less than 18LBS.