Five steps of dyeing edge in luggage edge modification- Pesin Outdoor Products Comp

Luggage edge decoration is a widely used process in the manufacturing process of luggage products, while luggage edge decoration generally refers to the decoration between components or between components, dyeing edge is one of the tips in the edge modification method, so briefly introduce the five steps in the edge modification of the bag. First, the cutting edge, the cutting edge in the decoration of the luggage edge is to cut the edge according to the process requirements to make the edge more straight and avoid burrs. Second, starting the line, after cutting the edge of the bag, the next step is to start the line. Before starting the line, use the iron or soldering iron to start the line at the edge, this can make the edge clearer, but the possibility of scalding the leather surface should be avoided. Third, the sand edge of the sand edge is to use the sandpaper to scrub the edge of the part to scrub the fluff on the edge of the part to make the surface of the part more smooth and smooth. Fourth, after the dyed parts are Frosted, the luggage parts can be dyed. The dyeing needs to be carried out according to the color required by the process. Generally, the dyeing temperature is at 30 ~ 40 ° C, in order to maintain the color brightness. Fifth, wiping the light is to wipe the brightener on the edge of the part, repeat 3 to 4 times, each time, the next time must wait until the previous wiping oil is completely dried before proceeding, this ensures a relatively uniform edge brightness.